Glass Cutter for Thick Glass Cutting Tool 1/4" with Glass Cutting Oil Made in UK
Glass Cutter – Not just any Glass Cutting Tool This is The Amazing Glass Cutter made in UK a manual Glass Cutter that lets you cut straight, radius and wavy lines in glass, mirror, stained glass and glass tiles.
Cutting Glass - The Amazing Glass Cutter
Video will open in a new window
Using the eBay App? Paste link into a browser window:
Glass Cutter – Not just any Glass Cutting Tool This is The
Amazing Glass Cutter made in UK a manual Glass Cutter that lets you cut
straight, radius and wavy lines in glass, mirror, stained glass and glass
tiles. The Glass cutting wheel is not sharp, in fact it is probably the dullest
tool you will own but the hardest, the hardness of the cutter blade along with
the special angle ground into the scoring wheel allows The Amazing Glass Cutter
to cut thick and thin glass materials and even Hard Tile without hurting the
wheel.
The Secret to using The Amazing Glass Cutter is to follow
the instructions carefully. Practice on a spare piece to work out the correct
pressure, usually not enough pressure is applied to start but it can cut be better
with less pressure also sometimes especially on glass.
Cutting on the floor instead of on a solid board at waist
height will give uneven pressure being applied along the score line and may
even crack the glass.
Not oiling the scoring wheel and making sure it is turning very
freely first can cause the wheel to bind, drag and even lock up and just
scratch the glass instead of evenly scoring it and this will prevent the glass cutter
from working correctly.
Holding the Glass Cutter by the plastic grips when scoring
with your strongest hand means that you are only applying minimal amount of pressure
if any on the cutting wheel at the point where the scoring is happening. Always
Pull towards you not Away.
For Stained Glass, Plate Glass, Picture Framing Glass or
Fused Glass the cutting wheel should be oiled every single score, oil will run
down onto the glass and will not only cool down the glass and give a cleaner
cut it will also extend the life of the cutting wheel.
If you can wipe the oil off the glass and there is no score
line visible, then you need to increase the pressure – make sure you are
holding close to the wheel and use the 2 handed method if needed especially if
you do not have a lot of strength in your hands or are cutting a very hard
material.
Secret for cutting thin strips of glass:
The gap between the aluminum breaker and the bottom side of
the jaws that holds the cutting wheel can be made smaller simply by folding the
breaker forward and twisting / pivoting it forward on the rivet, this can be
stiff to start with when the tool is new, and it can be glued in this position
if you only cut thin glass all the time.
Glass sheets for crafts can be Cut From 1/16" To
3/8" Thick and upto 8ft long can be cut and even thicker Glass Can Be Cut
Using Techniques Included In The Detailed Instructions. Available in Red Black
and Pink and also left handed – See somebody cares.